Originally Posted by mopar01bk
How do you program the remotes without a scan tool do u have or know were I came find that write up thanks
I was looking in his car manual that he had me hold while he was working with the scan tool. I also saw the same thing when I did a google search. When I get off work,I'll find it.Basically in his book it said you have to have a working factory key fob not a aftermarket one for this to work.
If I remember it right it goes:1-open the door with your factory remote;
2-get in close the door;3-open the door & lock the door manually;4-turn the key to the on position;5-wait 10-20 seconds & then hold the lock button until you hear the power locks move;6-press unlock to make sure it works.I may have 3 and 4 mixed up,I'm not sure.
The manual said this works for 99 - 04 jeep grand cherokees.He told me he usually uses this method for other grand cherokees that need to program extra remotes.I was about a block or two away from his house before I realized that one of his books was still in my jeep.Before you ask,of course I turned around and took it back.I remember him telling me that book cost a couple of hundred dollars.