Re: power cuts at 3500 prm
Originally Posted by hoffmanestates
Wouldn't timing cause it to well bend valve?
Sent from my LG-P999 using Tapatalk 2
If timing is just off a half tooth, it would still generate his symptoms but not neccessarily bend a valve.
I was off a half tooth on one of my cars, pulled like a bear up to around 3k-3500 and then it was like hitting a brick wall and through a CEL.
Again, just to be clear, this was all on hemi engines.
2015 Billet Silver
2012 300SRT, 2009 Jeep SRT, 2006 Charger SRT
Too many mods to list for each, so let's just say a lot was done over the years.