Re: quadra trac ll question
Ok, solved the problem......I did replace the front right and left axle thinking maybe one of the CV are going bad, but once out I quickly realized they are OK, but with 165K on them, I could not expect them to last too much longer....Once having new left right install, the clicking noise did not go away.....
So, there was only one last possibility, and that was the Transfer Case Chain.....I ordered one, pulled the unit out, and yes, very loose. Replace the chain then bingo!! It was the chain skipping and now I have full torque with no clicking noise....
The reason I thought it was coming from the front is that the TC is mounted to the Tranny and that is supported by the rubber mount. thus this noise would move forward thru the tranny and thru the front drive shaft, back into front drivetrain into frame back to me... I would not hear it coming up from below where the TC is