Jeep Garage  - Jeep Forum banner

Turn signal and hazard light problem

12K views 7 replies 6 participants last post by  Frango100 
#1 ·
Can anyone out there show me some pictures on how to remove the fuse box in order to replace a hazard light relay. I am told that this is something that I can tackle myself. My vehicle is a 2000 jeep grand Cherokee limited 4 door 4X4 8 cylinder. Would appreciate any help.

Thanks
:confused:
 
#7 ·
What relay in the engine bay are u talking about?
Bc my 02 jeep gc has this same issue I soldered the pins on flasher relay and then I lost everything no hazard or blinkers. I bought a new relay and same results no blinkers no hazards. But now when I lock it all four lights flash. This has me pretty confused. When u said something about relay in engine bay maybe that's where my problem is....
 
#5 ·
It seems that the solders in the combination flasher relay can get loose, making sometimes contact, sometimes not. If you know how to solder, its an easy fix, or a new combination flasher relay.
 
#6 ·
i had same prob for period of 3 months. hated being called ****** & MF everytime i changed lanes in traffic daily...esp by women drivers :mad:

you tube vid "Full Cheap (FREE) OEM: Turn Signal "Blinkers" Relay Failure Repair 99 - 04 Jeep WJ Grand Cherokee " by joerockcane

got real cheap at junkyard (salvage) they are sensitive about that name from another jeep was best option
 
#8 ·
I also wonder which relay under the hood (probably in PDC) can solve this problem. At least there is not one relay dealing with the turn signals in there.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top