Re: Hey guys I have Problem here
The instrument cluster receives information for the gauges from the PCM, via the PCI data bus. If the bus was the problem, then the engine will start, but shut down after some seconds.
First check fuses 17 and 22 on the junction block at the drivers footwell area.
When ok, then i would suspect the cluster to be faulty or maybe a connector to the cluster not fitted well. You can test the cluster doing the following: with ignition in off, press the odometer reset button, and while pressed, switch the ignition in run (you can now release the odometer reset button). All the instrument panel lights should come on, all the gauges should go full scale and back to normal and the odometer will show all 0000 until all 9999.
Let us know what you find.