Re: Help with coolant flush
Engine fully warmed up and heater turned on full blast?
Just some poorly educated guesses based on what I've seen with other vehicles.
The engine being warmed up opens the thermostat to allow coolant in/out of the block. The heater on full blast opens up the heater core to allow coolant in/out of the heater core. I'm not aware of there being any other restraints to coolant flow.
The standard disclaimers apply: hot coolant is under pressure and can burn you and/or erupt violently when the pressure is released while hot.
Check youtube for basic how-to on coolant flush?
Deep Cherry Red 2015 JGC Ltd EcoDiesel with Beige Interior / ORA II / Lux II / 8.4AN
Mods: DEF injector guard | Mopar splash guards | Green Hornet fuel cap | Fumoto F-106 oil drain valve | aFe Pro Guard 7 engine air filter | Mopar molded running boards | Mopar roof rack cross bars | Mopar rear cargo net | Mopar rear cargo liner | Husky X-Act Contour floor liners | Mopar "Rugged Off-Road" Black & Machined 18x8 wheels