Originally Posted by TinMan.KC
That's what I'm doing as well, rotated the bottle so the body shop is ok with the fit.. If I come up with a bracket, I'll send pic's..
I picked up my jeep last night. the hood looks pretty cool. By disconnecting the left-most mounting screw and rotating the bottle towards the ECU, the hood scoop clears the cap easily. I had a bracket to extend the new mounting orientation but I seemed to have misplaced it. I see that as kind of a non-issue. However, there is another problem.
The body of the bottle itself still hits the underside edge of the scoop. I think the whole thing needs to come down an 1/8" or so. The hood will still shut, but I think over time it will cause problems (either the interior scoop will crack or the hood itself will develop a warp.
I'm not sure what I am going to do but I'm leaning towards take my dremel to the inside (underside) of the scoop to see if I can provide the needed clearance. It may not take much. I'm curious to hear your take once you get a chance to fiddle with it.