Jeep is still stock as of today... But look what I do have on hand waiting for nicer weather
How is this for pics/update...
I don't know if I should install the 2inch lift to accommodate a 22inch rim with tire rather than no lift and a 20 (my concern is also the tire price will be too expensive for my personal choice). Is anyone running a lift and bigger than 20 rims? What size tires and i would prefer not to do any trimming if possible. Any suggestions?
LEDS need to be installed in new headlights
4 Shocks to go all around
My rear window glass shocks are shot- so this will keep the glass up if i ever open it...
After installing some interior LEDS in the back seat you can see the difference. Need to order more for the front (up top console) and 2 (or possibly 4) doors.
Here i replaced just the left side for comparison
Here is both backseat vs front seat with LEDS
Replacement Steering stablizer (starting to see light DEATHWOBBLE when hitting bumps at speed - not too bad and just tried rotating the tires to fix, but didnt).
My 35Watt DDM Tuning HID kit - 6000 temp bulbs with harness included.
My new rear sway bar with Engery Bushings needs to be installed
3rd brake light - black with RED LEDS
Looks to be plug and play??? haven't taken the stocker off yet.
Gen3 headlights - wired up just waiting on some ebay parts/connectors to tap into my daytime running light's to power the halo and LEDS
2inch - Rusty offroad bb lift (didnt install past weekend since i will need an alignment after installing i have read)
Replacement plug and play Euro tail lights. I installed these but when i got to my right one (after installing left already and it was working) i seemed to be having issues. With the four way flashers on and plugging in the right assembly I was unable to get it to illuminate correctly - bulbs light lightly/dimly (and didn't flash). Email corresponding with the vendor now, might try tomorrow or Saturday to install the right one on the left socket to further isolate the issue (but stockers work just fine ofcorse...).
Only part i have of my Kolak 3inch exhaust so far is my Magnaflow rolled edge exhaust tip.
What my living room looks like at the moment.