We have been working hard to bring the 4.7L world the parts that nobody else could or would.
In the last year Air Ram Performance has brought the 4.7L community more performance parts then ANY other site that claims to support the 4.7L engine. In many cases we are the only ones who carry these parts because we invested directly with the manufactures to have them make the parts for us.
This by no means is everything we offer... we just want to show you that we are dedicated to the 4.7L comunity unlike any other supplier/vendor ANYWHERE. Please view some of our HIGH PERFORMANCE 4.7L PARTS and let us know what you think.
ARP HEAD STUDS
- Until we took the time and money to hire ARP to make these head stud kits... they where NOT available anywhere. We offer both ARP 8740 head studs and ARP 2000 head studs.
ARP MAIN BED PLATE STUDS
- We offer the ONLY complete 28 STUD BED PLATE KIT... No other place offers this kit... because we took the time and hired ARP to build these studs for us.
ROSS "FORGED" REPLACEMENT PISTONS
- We are not the first to bring Ross pistons...but we are the first to offer a set that fits as a direct replacment piston. We offer the ONLY pistons that can be used with your stock factory rods... We don't recommend it but we have had customers take that option. Teaming our ROSS pistons with our SCT H-BEAM rods is the first step in building a bullet proof 4.7L engine.
SCTAT H-BEAM RODS
- We offer the first and only set of replacement rods that will fit your crankshaft without the need to modify the crank to fit the rods. The stock 4.7L rods are 6.123 and our SCAT rods are 6.125 long.
- These are factory replacment Forged Cranks... We have them IN STOCK and ready to ship.
SULLIVAN INTAKE KIT
- This is an aluminum SINGLE PLANE INTAKE MANIFOLD that will bolt right onto the 1999-2007 4.7L engine and allow for the use of the 4.7L throttle body. and sensors.
AIR RAM 4.6L to 4.7L HEAD ADAPTER PLATES -
These plates allow you to run any intake that mounts to the Ford 4V 4.6L engine to your 4.7L engine... Think about it... there are THOUSANDS of choices for the 4.6L engine... now many of them are available to your 4.7L with these adapter plates.
CNCed PORTED HEADS
(we still offer the best flow numbers in both LOW & HIGH high lift useing the stock valve... our competitors use larger valves and still can not outflow our stock valve heads.
ATI HARMONIC DAMPNER / BALANCER
- NEW RELEASE (JUNE 18 2009) This is our latest offering to the 4.7L community. Increase the life of your 4.7L and help protect it when reving too 6,000+rpms where deadly harmonics can rob power and cause engine failure. You may chose to add a 10% 0r 25% underdrive pulley at no additional cost for even greater gains.
2008 INTAKE CONVERSION KIT -
Now you can run the 2008 intake manifold on your 1999-2007 4.7L engine. All you need is the 2008 intake manifold and our Throttle Body Adapter Kit. This intake is SUPERIOR to any other factory design to include the 2002 H/O intake. This is the intake I have on my 4.7L at the moment.
CLICK HERE TO VISIT OUR AIR RAM 4.7L PERFORMANCE SECTION. This section is completely dedicated to 4.7L performance products.
If you have any questions please feel free to contact me.
SPEED SAFE, NICK
817 800 7760