I recently reached out to Marlin at JeepinbyAl.com to see if he had any plans to produce an aftermarket Upper A-Arm like the ones he's been producing for the KJ crowd. He was very interested and began design work for the WK upper a-arms this week.
With his permission, I'm posting a picture of the KJ aftermarket arms.
Marlin tells me the new arms will be the same design, accomodating lifted WK's, and obviously sized for the WK's. I believe these will fit the XK's as well, since we share the same upper control arms. Someone correct me if I'm wrong.
I'll keep this thread updated as he updates me on the progress
Description:
The Jeepin' By Al Upper A-Arms were designed for your lifted Liberty and will directly replace your stock upper a-arms. The original equipment a-arm hits the spring, which causes premature ball joint failure on Liberty's with a lift kit. The Jeepin' By Al A-Arms are compatible with all the lift kits on the market today! These A-Arms were designed to fit on 2002 through 2007 Jeep Liberty's. Made of heavy duty tubing, red powder coat finish, with Moog replaceable ball joints and factory rubber bushings. The A arms are assembled and ready to bolt onto your Liberty. Sold as a set, 1 left & 1 right UCA.
As seen in Low Range, J-Rations, Jp-Freek, 4 Wheel Drive and Sport Utility Magazine!
New Gen 4.5 A-arms, Pocket adjustments
Ball joints are mounted on an angle to line up with steering knuckle
No tire rubbing
3/8" more strut clearance than factory arms
Factory front end alignment
Replaceable ball joints
Red powder coat finish
Heavy duty tubing
2002-2007
A-arms work with all Jeepin by Al lift kits!
Sold as a set
Installation Notes
install time: 1-3 hours
instructions: Download PDF
With his permission, I'm posting a picture of the KJ aftermarket arms.
Marlin tells me the new arms will be the same design, accomodating lifted WK's, and obviously sized for the WK's. I believe these will fit the XK's as well, since we share the same upper control arms. Someone correct me if I'm wrong.
I'll keep this thread updated as he updates me on the progress
Description:
The Jeepin' By Al Upper A-Arms were designed for your lifted Liberty and will directly replace your stock upper a-arms. The original equipment a-arm hits the spring, which causes premature ball joint failure on Liberty's with a lift kit. The Jeepin' By Al A-Arms are compatible with all the lift kits on the market today! These A-Arms were designed to fit on 2002 through 2007 Jeep Liberty's. Made of heavy duty tubing, red powder coat finish, with Moog replaceable ball joints and factory rubber bushings. The A arms are assembled and ready to bolt onto your Liberty. Sold as a set, 1 left & 1 right UCA.
As seen in Low Range, J-Rations, Jp-Freek, 4 Wheel Drive and Sport Utility Magazine!
New Gen 4.5 A-arms, Pocket adjustments
Ball joints are mounted on an angle to line up with steering knuckle
No tire rubbing
3/8" more strut clearance than factory arms
Factory front end alignment
Replaceable ball joints
Red powder coat finish
Heavy duty tubing
2002-2007
A-arms work with all Jeepin by Al lift kits!
Sold as a set
Installation Notes
install time: 1-3 hours
instructions: Download PDF