Re: RRO leveling kit write up *how to*
Hey all, thought I would add some info on a couple of differences that I came across on the install on my 2014 GC Limited 4x4.
First of all, THANK YOU TonyTJ for this writeup, it was a HUGE help during the install.
1. On the sway bar, the 6mm socket was an 8mm for me.
2. On the strut mount, the 23mm bot was a 24mm for me.
The only additional tool that I used was a set of ratchet straps. These really helped make fine adjustments and support some weight as I working through the install. I performed the install by myself and this really helped.
Final note, after the install my front fender was about an inch higher than the rear. I was afraid I did something wrong. BUT after a couple of days it settled down to perfectly level. SO, just as with some of the more difficult parts of the install, patience is a MUST.