Re: A little help fellas?? PS reservoir removal.
3.7L & 4.7L
Hydraulic pressure for the power steering system is provided by a belt driven power steering pump (4). The pump shaft has a pressed-on drive pulley (5) that is belt driven by the crankshaft pulley. The power steering reservoir (1) is mounted to the pump body (4). 3.7L & 4.7L
1. Siphon power steering reservoir.
2. Remove the cooler return hose at the reservoir.
3. Disconnect the pressure hose nut at the pump.
4. Remove the pressure hose at the pump.
5. Remove serpentine drive belt, (Refer to 7 - COOLING/ACCESSORY DRIVE/DRIVE BELTS - REMOVAL).
6. Remove 3 pump mounting bolts (1).
7. Remove pulley from pump if necessary (Refer to 19 - STEERING/PUMP/PULLEY - REMOVAL).
3.7L & 4.7L
1. Install pulley on pump if removed (Refer to 19 - STEERING/PUMP/PULLEY - INSTALLATION).
2. Install 3 pump mounting bolts (1) and tighten to 28 N·m (21 ft. lbs.).
3. Install the drive belt, (Refer to 7 - COOLING/ACCESSORY DRIVE/DRIVE BELTS - INSTALLATION).
4. Install the pressure hose on the pump and tighten the nut to 28 N·m (21 ft. lbs.).
5. Install the cooler return hose at the reservoir.
6. Add power steering fluid, (Refer to 19 - STEERING - STANDARD PROCEDURE).