Do either of u guys know if there is some sort of adapter that may plug into the back im trying to go the least expensive way possible but if thats the only way i will have to go that route thanks for the help
From what I can see the input does not physically exist, There is no way to add it if the port is not there. Guys previous are correct, look for a used Head.
I did install an aux port on my rec navigation, and all I used was an ethernet cable and an aux port from radio shack. Total was about 5 bucks. When I plug in an aux cable into the port the sat radio becomes aux. BTW mine is a limited and came with rec nav and sat radio.
I bought the isimple off amazon for 65 and then an aux cable for around 5.you can feed all the wires into the center console.allows you to control your ipod from steering wheel plus charges ipod.aux cable i just use for other devices with a 3.5mm jack.
You might as well get the dash kit, wiring and a cheap aftermarket radio. For paying near 100 bucks for a stock radio you can get better quality aftermarket wise.
He's talking abut the stock radio with no navigation. So these navigation comments will not work. He wants Aux audio cable. I had the same stock radio in mine.
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Related Threads
?
?
?
?
?
Jeep Garage - Jeep Forum
1.7M posts
176.2K members
Since 2009
Jeep Garage is where you can talk about all your favorite jeeps including the Cherokee, Liberty and Grand Cherokee.