Jeep Garage  - Jeep Forum banner

no positive on relay

4K views 29 replies 9 participants last post by  MasterWK 
#1 ·
hey guys new to this site. Heard great things about this site. Well just like the title says there is no positive ground where there should be on the relay harness. I purchased this from ddm tuning. Where there should be a positive ground its acutally connected together they both connect from each other and feed back. Is this correct? Any help would be great.


Thanks
 
#12 · (Edited)
I installed a bi-xenon kit from them today but the bi-xenon relay is diffrent. when I bought my kit from them over a year and a half it didnt look like that. it looks like they are using lesser quality products to lower their prices. the power wire should have a fuse running through it with a ring at the end to connect to the battery. the one you have should work, it might not be the best but yea...

Edit: maybe try putting a picture where the wires are less tangled,
 
#22 ·
run one of the silver rings to the positive on the battery and one to a ground on a fender. I woldnt recommend one relay for two headlights.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top