Re: Passenger high beam
Im sorry but you probably have a front control module problem... I just had a pt cruiser like a month ago, I just double checked the schematics for this to verify it could be the same concern, but each individual high and low beam head lamp bulb has its own driver in the FCM. If you dont have power to the headlamp, check for continuity from the connector on the bottom of the FCM to the headlamp connector, check for continuity to ground too jiggle the harness while monitoring the 2 previous stated measurements. If all checks out you need a front control module... sorry.
According to the schematic there is no fuse, the point of a fuse is circuit protection, and according to the schematics it has lamp "drivers" and drivers usually have circuit protection built in, if there short it can shut off the specific driver. Not to say for sure there is not, so check them anyway.