Jeep Garage  - Jeep Forum banner

Removing the emblems from my jeep..

11K views 4 replies 5 participants last post by  blackpepper 
#1 ·
I was wondering how i should go about removing the 4x4 and the Laredo emblems on the back of my tank...
 
#3 ·
  • Like
Reactions: blackpepper
#4 ·
just park it out in the direct sun and use a hair dryer to soften the adhesive. Mine popped right off after that. Then i used some goo gone and alcohol swabs to clean th area. I then applied a coat of wax.
 
#5 ·
Nate has a good method! +1 !!!

I recommend starting on a hot day, take a hair dryer to each individual emblem for 30-60 seconds then take your index and middle finger and place them horizontally over the emblem. Grab a small flat head screwdriver with your other hand and pop the emblem off using your fingers as torque/leverage. Take your time when prying the emblems off, you want to keep as much glue as possible on the back of the emblem (makes the clean up easier). If the glue isn't coming off as easily as you want, stop half way, reheat the emblem and then continue to remove it.

Clean with goo-gone, a wash then clay the rest of the gunk off. Add a coat of wax for protection and you should be done!
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top