Re: Replacing antenna mount
Ok, here me out bro before you get all bent outta shape. (Ha!) as long as the inside part of the antenna is good (with the threads) it's easily salvageable. First clean the threads with a wire brush. You will get better reception without any corrosion. Next, hit up harbor freight for the cheapo POM rivit gun stuff (to reinstall your inner fender). Finally visit either tascaparts.com or moparonlineparts.com for your replacement base & antenna. I used a pair of Locking pliars & a washcloth to tighten it up! You could get a big o-ring yo sit under the base then cut it out with a utility knife for a tight fit. DONE!
I had to replace my fender a while back. Garage jumped out at the wife. New headlight as well. I used a HF paint gun and went to a bodyshop supply shop. Can't even tell!