So I think that I have seen this before but I'm not quite sure how it would be done. But in the paneling towards the back of the jeep there is a little slot that would be perfect for running a 12v power source to. My question would be is this possible? And if so how and what would I need to get the job done? Thank you all for the help!
It depends if you are talking about the 12 volt power plug on the right rear then some WJ's have a plug covering the hole and some WJ's have the power and plug to power up the 12 volt power jack behind the plastic but you have to pull out the paneling. My 2001 Laredo did not have the power behind the panel I had to run power from the front to pervade 12 volt power to the plug. Good luck
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Related Threads
?
?
?
?
?
Jeep Garage - Jeep Forum
1.7M posts
176.1K members
Since 2009
Jeep Garage is where you can talk about all your favorite jeeps including the Cherokee, Liberty and Grand Cherokee.