Re: No sound on right front speakers
Originally Posted by JMLoughrey
Lastly, i'd actually put money on this, jeeps have a nasty little habit of breaking the lines going into the door. I've seen installers put speakers in, everything works before hand, but afterwards they tugged just a hair to hard on the speaker leads and snapped the little bit that was left holding them together. If you meter at the speaker and get 4 ohms, meter your speaker lines right before they enter into the door boot, somewhere along the kickpanel. I can't tell you how many times i've had to repair/replace speaker lines in jeeps because of the wires snapping over normal wear.
HE IS 100% CORRECT. i would put money on it that the line is broken somewhere. I have over 10years of car audio installation experience and id say 90% of the time when i do a speaker install in a Jeep from 2001 and older it turns out to be the factory speaker line needing to be bypassed and replaced. Sucks, but it is what it is.
You can easily google the wiring pinout for the stock infinity amp. I would take a test speaker and check the output at the amp to make 100% sure that its not your amp. But like i said, most likely its the stock wiring.
2008 WK Laredo 4x4
RC 2.5" Lift, Bilstein HD, Monroe LL, 265/70/17 General Grabber AT2, JK Moabs, 1.25" spacers, K&N 57 Series, PW Mod,
DDM 5k Lows, VLED 6K LED Fogs, Stillen Covers, 15% front tint, BA System, Infinity 3.5" dash, JL Audio 250/1 & StealthBox