ok this is installed. very easy install. you need a 5/16 socket for 3 bolts that mount the TB. And a T25 to remove the IAT and the TPS from your TB.
here is a pic of the stuff you need to disconnect and also the 3 mounting bolts.
closeup of the cables.
The longer one is removed by moving the throttle to open and using the slack to reove the cable.
the other one if removed by GENTLY moving the connector forward. if you try to pull it sideways, youll need a new cable. dont do that.
then you need a torx T25 on a ratchet to remove the tps and the IAT. this pics shows TPS mounted on new TB.
I only put about 25 miles on it but initial impressions are a bit more responsive throttle. and a bit more scream at WOT;