Jeep Garage  - Jeep Forum banner

Upper a-arms for lowered jeeps

3K views 14 replies 5 participants last post by  lineman 
#1 ·
hey guys just wanted to let you know the upper a-arms are finished as of janruary 3rd. they are to be paired with the srt8 eibachs or bwoody/roadmagnet springs.they will correct -camber so your tires won't wear out on the inside tread. have you bought a set yet SCOTT.
 
#6 ·
my Jeep aligns fine. All the wk guys need to have their Jeeps aligned to SRT specs when they have 20's and are lowered.
 
#14 ·
Hahaha! i have no print out... i cambered the jeep myself!

The best camber to have even wear through out the wheel is to have zero camber. I got a leveler, attached it to a tall piece of steel rod, and placed it parallel to the jeep rim, Then i adjusted the wheel camber so that the wheel be at 90 degrees vertical to the ground. now, i have a ZERO camber. both front rims are perfectly parallel to each other.. i have zero wear issues, i have over 1000 miles on it and it drives great. thats my story :)
 
#15 ·
hamze i have 10,000 miles on srt8 eibach springs. let me know how your tires are later down the rode. i also took a 4ft. level placed it on the face of the wheel torward the bottom of the tire.then from the top of the wheel pulled a measurement to the level when it was in bubble and was off 1/4" with the camber adjustments maxed out.also the upper ball joint is at an extreme angle just sitting still.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top