I got the Xentec kit from tony on SJ. I know I wired everything correct but I'm still having this flashing issue. When I unlock my doors and the headlights cut on my drivers side flashes off once then it cuts on and stays on. But it's only when the car isn't running. I swapped the ballisters, bulb, relay with the other side and it's still only that side doing it. I even rewired everything and moved the groung to a more secure place and still the same thing. I don't know what else to do. here's a video of what it's doing. Look how the right side flashes off really quick.
You know what? I thought I did change that but either when we were doing the led's and I unplugged the bat or when I was rewiring things at my house and I dis connected the bat I think it reset. But I'll do that now.
its easy to keep the lights on wehn you shut off the car!!! when you are gonna turn off the car leave the lights on and then shut off the truck. after you shut off the truck turn the lights on and they will stay on for however many seconds you have it set for. mine is set for 30 or 60 secs and then you can disable the lights on unlock!!! the dual leds should be easy to do
Not sure if this helps, but i was having an issue with my drivers side HID flashing while driving and shut off a few times. After messing with the whole thing it ended up working properly by splice tapping another ground wire from the harness to the body. zero issues since then. maybe this will help anyone with flashing issues, its usually the ground from what I hear.