Jeep Garage  - Jeep Forum banner

Way to turn all lights on with high beams

3K views 5 replies 6 participants last post by  DAVY27 
#1 ·
Is there a way to wire all headlights to turn on with my high beams
 
#6 ·
IDK about the wk2 but there is another way(on my wk1) without the starscan. I guess this only works with an aftermarket HID and a relay. On the relay there is a connector per side. Supposedly you connect the low beam connector on the main wiring harness to it on each side. BUT if you connect the low beam harness to one connector of the relay and the high beam connector to the other side, the HIGH and LOW will BOTH go own. The high will automatically turn on so now way of it having it off unless you unplug the high beam connector from the relay.You can then turn on the fogs too.

Dont recommend doing this, i just stumbled on it while rewiring all my lights.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top