Originally Posted by bill_de
Question on the 4 wheel low in QTII and QDII.
I read that in order to get into 4 wheel low you need to be coasting at 3 - 5 mph. Prior vehicles I owned you had to be standing still.
Does this mean if you are in 4 wheel high and get stuck you can't switch to low until you get moving again? That makes no sense to me.
That's a 'lil screwball. Here's the quote from the '13 manual and from all the "command-trac, selec-trac, quadra-this quadra-that" Jeep vehicles I've owned in the past:
4WD HI To 4WD LOW
With the vehicle at speeds of 0 to 3 mph (0 to 5 km/h), the
ignition switch in the ON position or the engine running,
shift the transmission into NEUTRAL, and press the
“4WD LOW” button once on the transfer case switch. The
“4WD LOW” indicator light in the instrument cluster
will begin to flash and remain on solid when the shift is