I'm going to assume when I had my passenger side window replaced is when this piece broke off. Never noticed it until a while back when I slammed the passenger side door and heard the rattle.
It looks like the part where it fits into the door and pivot snapped off. I'm guessing the installer pried from wrong side originally.
Anyone know a part number or replacement? I could always use some sort of sticky putty, but rather not ghetto-rig my vehicle.
You would need part #3 in the diagram below... just order the correct side.
Driver = Left (LH)
Passenger= Right (RH)
Part# 1NC24DX9AB
My rig was missing both on the drivers side from day one. My dealer couldn't figure out what the part number was. So i got fed up with them and went to my friend at local Jeep parts department and ordered these. Worked like a charm. I attached a picture of the part i ordered for the driver side of my Jeep.
*Note*that the part number on the back of the panel does not come up in the Chrysler/Jeep system. You will have to reference the DX9AB part i listed above.