Jeep Garage  - Jeep Forum banner

Removel Of the Dealer Mark On Liftgate

4K views 19 replies 18 participants last post by  JTS97Z28 
#1 ·
What is the best way to remove the dealerships name from the liftgate, without damageing the paint? It seems to be vinyl stick on lettering.
 
#3 ·
^^^^^ that is right use a hair dryer and peel it off just go slow. Or you can go to a marine store and get some registration number remover made by 3M. Just go slow.
 
#5 ·
after you get it off...use something like goo gone or an alcohol wipe to get any adhesive left. I would theen apply some wax to that area to protect it.
 
#7 ·
I never leave the dealership with one on. I make it a condition of the sale; no stickers, tags or lic. plate frames.

But the above is good advice. I have also heard that dental floss works well as kind of a saw.
 
#16 ·
Did that with my Subaru...
Forgot to do it with the Jeep.

Hair dryer and a few minutes of patience and it peeled right off.

I feel the same way as others.
If they want to pay me a monthly stipend to advertise for them, then I'll leave it on, otherwise it's gone.
 
#13 ·
Thank goodness they are just stickers these days.... I just peal them off after parking in the sun and use goo gone for the adhesive that is left.

I have asked dealers to not put on the stickers but they do anyway...not a big deal though. Of course, the cheesy license plate frame goes right in the trash too....
 
#18 ·
My selling dealer doesn't put any stickers/emblems on at all.....which I don't mind but it seems awfully odd to me. They do put a license plate frame on but didn't put one on mine for some reason. If they had I would have pitched it because they are the terribly cheap black plastic/white printing that starts fading as soon as you drive off the lot.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top