Re: UConnect 2014 memory issues
I believe the display only shows check marks for functions that are active in a particular mode and saved for a particular driver memory (1 or 2 on door or from key fob). If you place a check mark with IGN in OFF, if that feature/function is not active for use in OFF, the check mark will go away when the screen is refreshed by UConnect (3 seconds) but will show as having a check mark in RUN. Also, if settings including radio presets for driver door or key fob 1 need to be set separate from 2 and/or settings saved prior to setting for driver door memory 1 or 2.
Possibly, some of the issues with check marks going away and settings changing can be due to Owner's Manuals not clearly describing how they show check marks only for what's available in a particular OFF/ACC/RUN IGN position and different for nothing saved for driver door 1 or 2 and for after saving driver door memory 1 and/or 2.
When programming settings in "OFF", some check marks also disappeared after 3 seconds but were checked in "RUN". I thought my Overland had the issues others described, but found that everything was 100% OK after figuring out what was going on.
Also, to quickly link key fob to settings memory 1 or 2, depress "S" on drivers door followed by either 1 or 2, after a couple of seconds the display will show "Saving settings to memory". While this text is displayed, depress "LOCK" on key fob and the fob will be linked to that memory setting.