Jeep Garage  - Jeep Forum banner

WK2 Dome Lights

6K views 11 replies 6 participants last post by  Stevekish54 
#1 ·
Any one know how to remove the lens off the fwd dome lights without breaking them, so I can install some LEDs???
 
#6 ·
Sometimes that “soft orange” is desirable. My prior car I bought into replacing all my lights with those 6000k Chinese LEDs, can’t remember now if it was deauto or superbright, and found I actually hated it. At night the vanity lighting and footwell light was soooo much glare I ended up putting the original bulbs back in. For my Jeep I replaced what bulbs I could with nice sylvania Zevo LEDs. The back half of the front map lights are replaceable so I have both colors and it looks nice. I left the footwell and vanity lights alone from my previous experience. And replaced the lights in the cargo area which worked well.
 
#8 ·
i ordered enough to replace everything i can. i got a free set of 194 leds for free when i got my fog light bulbs. i put them in the back hatch. amazing what a difference it made when its open. you can actually see inside and lights up the ground pretty damn good too. i just wish i had all the bulbs for the reverse and what ever other light are in there while i had the plastic off. now i get to do it again and hopefully not break anything while im in there. the plastic is very thin on the tower parts that hold the push clips.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top