Thank you for the link!!! Yes, If I had to purchase the "plug", i know i'd have to buy the whole harness.
I am in the process of installing the Rear View Camera, and the goal is to be a "vanilla" install, meaning that I want to avoid splicing into any wires. I am on the last stage of this installation.
I have a custom harness running from the radio plug, all the way up to the Liftgate(body side) plug, but I need to add 3 pins to the plug in the picture where the camera' harness connects into, and because there isn't a part number available for that Liftgate harness, I was going to use a donor plug, remove 3 pins with the wires and add to the empty/correct pin location and terminate my custom harness.
The link you provided didn't help with the 2014 JGC connector that i need. Then i searched for a 2013, and found the C390 and C392 connectors. They are what i'm looking, but they are the Liftgate(out) connector. I need the Liftgate(body) side.
Even when i wasn't able to find the correct part number, i searched the web with the C390 and C392 and found some random pictures of 2001 JGC door switch connector and further searches directed me to a 2011 Dodge Challenger amplifier connector. Those connectors aren't 100% the same as in this picture that i posted, but i will be able to buy them and use the pins that i need to add to my harness!!!
Again, thanks for the Link!
Originally Posted by robpp
they arent selling you a PLUG. maybe the complete harness that it goes to.
what are you looking for specifically?
or what are you trying to do?
this site gives mopar part number for replacement connectors
Mopar Connection Repair Kit