Re: Wk2 Lack of Hemi Badge
I measured the distance of the 4x4 badge from the crease above and the edge from the left of the tailgate. I used masking tape (= to measurements) along the crease of the tailgait (right) to match the depth below the crease line and also taped off the right edge to match the left, to align the new badge. (sorry if this sounds confusing)
I guess you can just "eye it" too.
(A laser level will be off if the vehicle is not on a level surface.)
2011 GC Overland, 4x4, 5.7L, Q-L, 730N, White/Beige. :thumbsup: