I dont have part numbers of pics...but its very easy!
PULL the push pins on top of the rear step, carefully pull it up to remove it. Then lay down on the ground and remove the push pins around the bottom of the bumper. Then remove the plastic rivets in the fender wells by drilling them out or cutting the head off. Last...there is one bolt on each side where the sharp point of the rear bumper meets the 1/4 panel. Its a small size bolt...like 4-6. You have to lay on your back and reach up through the bumper with a small ratchet and unbolt it. The bolt like I said above is right where the bumper corner meets the 1/4 panels. very easy.
__________________ SCOTT The HARDER you work...the LUCKIER you are!
2014 REDLINE red Jeep SRT "BLOODIED\BlackOps CFR Edition" 1 of 1
2013 JKU Wrangler 10A-stormtrooper'ed, JW Speaker and more! Previous JEEP rides-
2013 Jeep Grand Cherokee SRT-deep cherry
2006 Jeep Grand Cherokee Laredo-inferno red