Jeep Garage  - Jeep Forum banner

Trans light reset??

2K views 8 replies 2 participants last post by  Frango100 
#1 ·
I own a 2000 grand cherokee laredo and there is absolutely nothing wrong with my transmission although a few days ago the light just randomly came on. About a year ago we had a new transmission installed. I was wondering how i reset this? Thanks
 
#4 · (Edited)
I did check the manual, but couldn´t find any transmission light. The only indication light there is for the tranny is a text" trans over temp" on the lower right corner. Are you sure its not the check engine light (# 13 on the attached picture) This attached picture is for a 2004 WJ, the 2000 manual mentiones the same lights, but doesn´t show the complete cluster.
 

Attachments

#6 ·
You need to do the key dance to see which fault code is stored in the PCM: switch ignition switch OFF/ ON 3 times and leave it in on at the third time. The odometer will show you the stored faults one at a time, or DONE when no faults stored. Let us know what you find.
 
#9 · (Edited)
I think that you removed the evap.solenoid. that one indeed pulses after a few minutes of engine operation. Its normal. Depending on model year, the leak detector pump is in the.engine.bay, or hidden behind the left rear.wheel well.cover. But it could be that the loose vacuum line was your problem.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top