Re: Will not start
Was just looking a bit deeper into this, but if G200 would be the problem, you would loose more components. Also eventhough the ignition switch is switching the G200 ground, its a signal for the BCM and not for the starter circuit.
G200 is used as a ground for the blower motor and AC system, but sofar i couldnīt make a link to the starter circuit. You are absolutly sure that the blower motor was working before this problem started?
I checked the power switching via the ignition switch, but also there is no common supply.
JEEP Grand Cherokee 4.7 Lmtd 2004
HID 8000K in low and fog / Quad Squad member
Monroe Reflex shocks /
Pirelli Scorpion ATR 245/65/17/
Transgo reprogramming shiftkit.