Originally Posted by TheStreet16
What was your process? I was committed to doiing mine in black but the OEM looks pretty sharp.
Put this on another forum, sorry I didnt put it up here.
Incase you wanna do it heres what you need:
Krylon Fusion Satin Spray paint - $4.75 a can I used 5 for all moldings
3M Wet dry sandpaper - $5 at auto zone (already had them from other details)
Painters plastic - $10 (home depot, or just use newspaper)
Detail tape - you probably already have from details
Isopropyl Alcohol - $1 at target
Total : $39.75
I wrapped the whole car and I'm glad I did now cause after seeing my garage this spray paint had a lot of overspray, more than usual spray paint even. But hey for under 50 bucks.
-sand plastics with 1500 grit, light pressure
-IPA wipe down
-look for missed spots
-IPA wipe missed
-Spray about 4-5 coats it took for mine to lay flat
-Let sit overnight, take off tape and covers
-Sit back and enjoy
Paint takes about a week to set fully but this krylon paint is great stuff, be sure to wear a mask or work in a well ventilated area when you go about doing it.
Let me know if you got any other questions!