HELP! major problems
Im going crazy, over the last month I been installing some new parts. I just completed the install which was Ported heads, Srtmax plus cam, AR headers and Catted mids, paramount TCM, paramount stage 2 Valve body, paramount TC 3000 stall. We pulled the engine installed the cam and timing chain assembly, replaced every seal and installed the heads. installed the tranny and parts. The headers were next, what a pain in the butt! Got everything together and installed a base tune from Johan, here came the problems. After a bit of running I got P0325 bank one sensor 1 knock code, the idle was surging up and down and would die when i go in gear without giving it gas. I hit the highway and data logged 13.50 degree LT knock while moderate acceleration and up to 5 degree at idle and my base spark goes in the negative when idling while bouncing up and down. I replaced the knock sensor and inspected the plug and wire all good. Stumped i replaced the MAP sensor and still the same problem. I only run 93 octane and never had any issue of knock before swapping parts. Where do i go next, I sub co tract for a dealer and the techs are lost. Help!!!!!!
Ethan Stanley 2009 SRT8 Arrington 426 82mmTurbo, Wider option Nitto NT05 front NT05R rear, gloss black brembo, oem projector upgrade , HID High/Lo, smoked fogs, reverse, Led tag bulbs, rear fog mod. Smoked tails, Putco interior LEDs, billet antenna, 40% tint on windshield 15% front windows, black SRT8 emblem, black wheels, matte black fender hash, Diablo Trinity, Johan tune, ST3A cam, ported heads and intake, ATI 15% OD, kooks, Bwoody endlinks, Paramount stall, stage 2 VB and TCM, BT catch can, 180 thermo, Arrington 85mm n20 TB, NX N20 kit, BW 82mm turbo, QTP cutout, Greddy Profec controller, stage 6 2 step.