Originally Posted by wkjeepgirl86
I tried putting in led bulbs in my tail lights the other day and for some reason it blew the fuse. the turn and parking lights are on separate fuses for each side. I had to go to work so i quickly threw a fuse in and haven't tried putting the bulbs back in. the only thing i can think of is i had the lights on when i was putting the bulbs in and out and it shorted something. not sure what to do going to try it again tomorrow with the lights off this time
the OP is talking about LED taillight assembly. NOT LED taillight bulb.
dont bother trying it again. you need what they call a CK bulb for the rear as well as a 6 ohm resistor. the resistor gets wired across the outer wires of the main 3 wire plyg. resistor gets hot so it need a safe place to mount.
both v-led and autolumination sell ck bulbs.