I own a 2008 jeep srt-8 i purchased a set of led tails from racer union i also have the lipz rear fogs harness and conversion.
Now i lost the top portion of the tail light first on one side then on the other.
Has anyone experience the same problem
I tried putting in led bulbs in my tail lights the other day and for some reason it blew the fuse. the turn and parking lights are on separate fuses for each side. I had to go to work so i quickly threw a fuse in and haven't tried putting the bulbs back in. the only thing i can think of is i had the lights on when i was putting the bulbs in and out and it shorted something. not sure what to do going to try it again tomorrow with the lights off this time
the OP is talking about LED taillight assembly. NOT LED taillight bulb.
dont bother trying it again. you need what they call a CK bulb for the rear as well as a 6 ohm resistor. the resistor gets wired across the outer wires of the main 3 wire plyg. resistor gets hot so it need a safe place to mount.
Common problem, I went through one set and bought another. Happened to a few of my friends also.
I heard it happens often, if my second set breaks I am not replacing it. I did hear though that some people were successful with getting replacements from the manufacturer.
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Related Threads
?
?
?
?
?
Jeep Garage - Jeep Forum
1.7M posts
176.1K members
Since 2009
Jeep Garage is where you can talk about all your favorite jeeps including the Cherokee, Liberty and Grand Cherokee.