Re: Check Engine, check guages, fan on high
I dont really see many of these with the 2.4, that said, as Frank said, both of your evap circuit faults are in connector 3 at the pcm, there is no shared circuit but they do both use that connector, make sure the connector is clean and free of moisture and other contaminants.
I havent messed with a cooling fan concern like this before, I know for subaru this code is typically an indication of a head gasket failure, the code sets when the fan is turned on and it doesnt lower the temperature of the coolant... This happens when there is no/low coolant. I would check your coolant level.