So I put in a simple rough country 4 in lift and have 35x12.50 mickey Thompsons. I was wondering what else I wou.d need to get it to stop swaying all over the road. Super scarey on the highway haha. Doable but scarey. I just ordered control arm bracket to try straightening out the axle a little bit. Eventually when I have the money I'm going to upgrade to adjustable track bars control arms tie rod and a flipped drag link. Is there any uniting under a strict budget that would stop the sway? I read that just lowering the control arms should do the trick with the rough country lift.
Thank you much guys.
Are you running stock track bars? If so your axles are likely sticking out one side quite a bit more than the other, and could have your springs at an angle. Get an adjustable trackbar for the front, and a bracket for the rear.
I have air pressure at 25 psi it's good now I put control arm lowering brackets on no more sway. Just a little bumpy of a drive now but I think that from the tires sitting on another jeep for a few years