Originally Posted by ChrisA
Here is the video on how to install missing wire.
*******Edited to make for easier reading********
Thanks for doing the video for all the mates that want to do this mod.
But I would like to point out that the wire with the metal contact can be pushed in from the rear of the plug.
If you look closely at the metal contact it is keyed with a small hump on the top and the hump matches the opening on the back of the plug so that it is oriented the correct way when installing the contact.
So essentially if you get the CLStech DRL kit all you have to do is install the metal contacts directly onto the harness wire from the kit if you were doing a permanent installation.
Once you remove the place holder plug you can put the locking cap back on the connector to position one install the wire from the rear ensuring to was properly seated, then push the locking cap back into the locked position.
(I am not sure if you want to do another video reflecting this)