I'm running the Pirelli Scorpion's Zero 305/35/22 with the Extremes on a custom 10.5 wheel on a 4 corners and have no issue at all.
NOTE: The Offset has to be right in order for the extreme Drop Springs to work. We went 1/2 inside the fender with the face of the Hoop.
I had someone call who's hoop was flush with the fender before the drop. Now after the drop on the extremes he rubbed so the Offset on a custom wheel should be 1/2+ inside the fender min for the extremes to work. Factory reproductions work on the Extremes no problems at all.
Oh This customers situation once he runs the arms and brings out the camber and toe back to OEM on the extremes he would have rubbed big time and will most likely sit right on the fender from what we gathered.
He is changing to the Mids and should have no problem no matter where the offset is.
I started this thread here so these would all be in one spot with pics for people to see. SO if I've sold you your springs or not could you please post pics so we have a reference for everyone to go to.
I know TOM has pics LOL
I also know I've sold 25 mid sets easy I just keep forgetting to direct people here LOL.
Your 2012+ Drop spring Pic. Thread Post HERE!!!!!!