Done. The second pic shows the emblem has a metal backing plate.
I kept it simple, popped out the trim from the radar eye in the center
and reached in with a 6mm socket quarter inch ratchet. After
snugging the nuts with my fingers I cut the excess studs with
a baby pair of vice grips. Picture looks a bit crooked but straight
on the jeep, note it's lined up with the grill design. Close enough
for me. She'll probably have me adjust it later...we'll see.
The last picture has a reflection from the light, looks white in a few holes to the left
of the emblem but is a wet jeep as it's raining here and just parked inside.