Jeep Garage  - Jeep Forum

Jeep Garage - Jeep Forum (
-   Interior/Exterior Visual (
-   -   Door Molding Options (

Immo 06-19-2010 08:02 AM

Door Molding Options
Looking for Door Molding Options. Does anyone know of a company currently making Door Moldings with SRT on them?

StoneCold 06-19-2010 08:18 AM

Re: Door Molding Options
Someone just posted pics the other day with black moldings with chrome srt emblems. I'll see if I can find it.

Not sure if this is what you're looking for but here you go...

DAVY27 06-19-2010 10:07 AM

Re: Door Molding Options
^ yep, Mike (downstate) got em!

downstate 06-19-2010 10:37 AM

Re: Door Molding Options

if that's what your looking for it's an extremely cheap mod, just buy dodge neon srt4 trunk emblem, drop the "4" and place them on your painted & shaved lower moldings :)

Scottina06 06-19-2010 11:34 AM

Re: Door Molding Options
the moldings you need are the 07 and up laredo door moldings. They are a little over $100 brand new. You sand the "grand cherokee" script off of them and then have them painted to match your Jeep by a pro body shop. The SRt emblems are then applied on the painted moldings.

Immo 06-19-2010 01:19 PM

Re: Door Molding Options
thanks guys!

litig8r187 06-19-2010 06:35 PM

Re: Door Molding Options
I have the painted Laredo moldings on mine but I've been playing around with trying to partially "inlay" the "SRT" from the SRT-10 truck into a set. I had the "SRT" from the SRT-4 on the back of my Jeep but I swapped it for the "SRT" from the SRT-10 because I like it's "weight". Unfortunately, the SRT-10 emblem is just a little too tall to fit the flat area of the molding without some work but I think it will look better than the SRT-4 if it is done right.

"SRT" from an SRT-10

"SRT" from an SRT-4

downstate 06-19-2010 10:14 PM

Re: Door Molding Options
^ oh damn! might have to play with that as well, added weight looks sweet!

DCSpecial 06-20-2010 10:07 AM

Re: Door Molding Options
The SRT-10 badge is nice....that's what I have on the rear hatch. I run the SRT-4 one on the moldings.



pjs1965 06-20-2010 10:37 AM

Re: Door Molding Options
Nice look Dan!

I've bought the SRT-4 emblems, next is the moldings then to find a good shop to paint them locally. I do that alot, buy up pieces for a mod I'm planning to do just so I don't forget to do it!

Hamze 12-16-2010 09:17 PM

Re: Door Molding Options
I have cut a matt black Vinyl SRT Logo to a length of 2.5cm ( in height ). it sits in the middle of the molding with 0.5cm clearance above and below :) no srt4, 6, 8 or what ever sizes here for me :P , and i like how vinyl sits flush with the paint work ... the crappy cell pics as usual ...

Immo 12-16-2010 10:44 PM

Re: Door Molding Options

All times are GMT -5. The time now is 03:32 PM.

Powered by vBulletin® Version 3.8.8 Beta 4
Copyright ©2000 - 2015, vBulletin Solutions, Inc.
Copyright 2012 - JeepGarage.Org
The Jeep Grand Cherokee Owners Community