Just replaced Blower resister and wiring harness it was completely melted to the old resistor housing.....
I did the auto test for the AZC by pressing the a/c and recirculate and what appeared was a code 52 error
52 = AI (Recirc) door travel range too large
Would this be corrected by recalbrating the AZC door actuators which I will try next or is this a bigger problem and I will have to pull the dash to get at the recirculator door??
I did the auto test for the AZC by pressing the a/c and recirculate and what appeared was a code 52 error
52 = AI (Recirc) door travel range too large
Would this be corrected by recalbrating the AZC door actuators which I will try next or is this a bigger problem and I will have to pull the dash to get at the recirculator door??