Jeep Garage  - Jeep Forum

Jeep Garage - Jeep Forum (
-   Grand Cherokee - WK (
-   -   Just cause im that lazy... (

maxst2 08-07-2010 06:37 PM

Just cause im that lazy...
I want to mod in auto up/down switches for the back glass... what all is there to the auto function?

06wkjeep 08-07-2010 06:45 PM

Re: Just cause im that lazy...
I am not 100% sure, but you could just probably swap the motor and switch with one like the front.

HemiDawg 08-08-2010 11:16 AM

Re: Just cause im that lazy...
I want to do this too. Are the switches on the drivers door a bank of four switches or are they two sets of two, front and rear?? If they are two sets, then maybe you the rears can be exchanged for a set of fronts. Not sure why they did not do this from the factory - sure is nice on my X5 to just hit all of them briefly and have all four windows drop.

5.7Unlimited 08-08-2010 11:43 AM

Re: Just cause im that lazy...
I dont think you could just swap a set of 'fronts' in there, a lot more work would be involved in this than you would think, plus the fronts have pinch protection which would make things more complicated for the rear setup.

robpp 08-08-2010 11:59 AM

Re: Just cause im that lazy...
swapping the switch has been tried unsuccessfully. im guessing you need switches and modules (regulators)

REKIII 08-08-2010 04:47 PM

Re: Just cause im that lazy...
There should be a way to rewire the board on the switch to make it do it. we are getting infor together to do the same thing on a friends subie. Should be along the same lines.

One big thing though is there will be no pinch protection.


All times are GMT -5. The time now is 09:24 AM.

Powered by vBulletin® Version 3.8.8
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
Copyright 2012 - JeepGarage.Org
The Jeep Grand Cherokee Owners Community