Jeep Garage  - Jeep Forum

Jeep Garage - Jeep Forum (http://www.jeepgarage.org/forums.php)
-   Trouble Shooting/Problems/Service (http://www.jeepgarage.org/f80/)
-   -   antifoulers (http://www.jeepgarage.org/f80/antifoulers-13988.html)

nycxed 10-14-2010 05:14 PM

antifoulers
 
i cannot pass NY inspection because of my kooks headers with high flow cats. i heard theres a solution to fix this. can anyone help? thanks in advance :)

robpp 10-14-2010 05:59 PM

Re: antifoulers
 
i saw you pleas for murfman on other forums....he was here for a while but hasnt been around lately.

the anti-foulers ONLY work on the 06 IIRc. maybe 1 or 2 07 have passed but NONE with Kooks, only ARH.

just get you self some standard anti foulers. i think he uses 2 per side. then its a hole 31/64 and some stell wool.

nycxed 10-14-2010 06:29 PM

Re: antifoulers
 
i have a 06 with kooks hi/flow cat. where can i get those standard foulers? i just dont want to buy any kind of foulers that wont work.

nycxed 10-14-2010 09:33 PM

Re: antifoulers
 
where are you murfman!?!?

nycxed 10-14-2010 10:01 PM

Re: antifoulers
 
post number 9

nycxed 10-14-2010 10:01 PM

Re: antifoulers
 
post 10!

murfman 10-14-2010 10:21 PM

Re: antifoulers
 
I have had the anti foulers on my Jeep since March of 09, and even with my 392 and Big Inertia cam I passed my first Illinois OBD test last weekend. I can make a set up for you, and send them out next week, as I am currently sold out. Thanks Murf

As stated above, they ONLY work on 06 Jeeps.

Knuckles 10-14-2010 10:56 PM

Re: antifoulers
 
Quote:

Originally Posted by murfman (Post 285157)
I have had the anti foulers on my Jeep since March of 09, and even with my 392 and Big Inertia cam I passed my first Illinois OBD test last weekend. I can make a set up for you, and send them out next week, as I am currently sold out. Thanks Murf

As stated above, they ONLY work on 06 Jeeps.


Still have your set and I am tinkering with it to see if I can get my 08 to be good for at least a few hundred miles before I have to reset the code.

Mike_Levy 10-15-2010 02:09 AM

Re: antifoulers
 
The non-foulers work on all years. My 08 got through inspection with them with Stainless Works 1 3/4" and high flow cats.

I made my own. Will never do it again. Without a drill press, drilling them out is a BITCH.

nycxed 10-15-2010 12:17 PM

Re: antifoulers
 
Quote:

Originally Posted by murfman (Post 285157)
I have had the anti foulers on my Jeep since March of 09, and even with my 392 and Big Inertia cam I passed my first Illinois OBD test last weekend. I can make a set up for you, and send them out next week, as I am currently sold out. Thanks Murf

As stated above, they ONLY work on 06 Jeeps.

cool. hope it works!

Quote:

Originally Posted by Mike_Levy (Post 285196)
The non-foulers work on all years. My 08 got through inspection with them with Stainless Works 1 3/4" and high flow cats.

I made my own. Will never do it again. Without a drill press, drilling them out is a BITCH.

it doesn't work for people who have kooks... :(

Knuckles 10-19-2010 08:32 PM

Re: antifoulers
 
Quote:

Originally Posted by Mike_Levy (Post 285196)
The non-foulers work on all years. My 08 got through inspection with them with Stainless Works 1 3/4" and high flow cats.

I made my own. Will never do it again. Without a drill press, drilling them out is a BITCH.


I believe they will work too Mike as I have an 08. I have a set that I bought from Murf and have modified and seem too look promising so far. How many miles do you get out of yours before you get a CEL and how many miles are you going thru to get thru the drive cycle so you rear O2's are in the Ready State?


All times are GMT -5. The time now is 03:00 AM.

Powered by vBulletin® Version 3.8.8 Beta 4
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
Copyright 2012 - JeepGarage.Org
The Jeep Grand Cherokee Owners Community