Jeep Garage  - Jeep Forum

Jeep Garage - Jeep Forum (http://www.jeepgarage.org/forums.php)
-   Interior/Exterior/Visual (http://www.jeepgarage.org/f182/)
-   -   Adding Automatic Headlamps! (http://www.jeepgarage.org/f182/adding-automatic-headlamps-15490.html)

Ricofrancois 11-24-2010 12:53 PM

Adding Automatic Headlamps!
 
2 Attachment(s)
Hi I went through the forum and could see very little info on adding auto headlamps to WK.

The information i got is that you need:

1- Stalk / Steering wheel switch with Auto Headlamps function
2- Auto Headlamp Sensor

The stalk is a direct replacement and the sensor connects in the middle of the dash under the windscreen (see photos).

My problem is that the harness is not there to connect the sensor!

My question is: Does anyone know where the harness is connected at the other end? On one end it connects to the sensor and on the other end it should connect to a module or something...

If the sensor harness is not there, can it be added?

Thanks

plynn7 11-24-2010 05:05 PM

Re: Adding Automatic Headlamps!
 
I had a 04 JGC that I had installed fog lights and atomatic headlamps. The wiring harness had been there for the auto lamps just had to add the sensor. The wireing was down in side the dash and I had to fish it bach up to the opening to contect the sensor. Maybe it is the same for yours, you may just have to dig around to find it.

SportRanger06 11-27-2010 04:16 PM

Re: Adding Automatic Headlamps!
 
I just got done tearing my dash apart looking for the wiring. I couldn't find it anywhere in my laredo, so it may not be in all of them.

Ricofrancois 12-12-2010 03:59 AM

Re: Adding Automatic Headlamps!
 
Can someone with a WK and Auto Light tell us where the other end of the harness is connected?

Milous 12-18-2011 07:06 PM

Re: Adding Automatic Headlamps!
 
1 Attachment(s)
Quote:

Originally Posted by Ricofrancois (Post 316144)
Can someone with a WK and Auto Light tell us where the other end of the harness is connected?

It plugs into the instrument cluster. Connector 3 pin 12 (signal) and connector 3 pin 15 (signal return).

Ricofrancois 12-18-2011 08:52 PM

Re: Adding Automatic Headlamps!
 
Thanks Milous

Do you know if there is a specific harness to use?

Milous 12-18-2011 09:06 PM

Re: Adding Automatic Headlamps!
 
Quote:

Originally Posted by Ricofrancois (Post 536352)
Do you know if there is a specific harness to use?

There is no separate harness available, the wiring is part of the very large I/P harness. Did you check under the dash for the harness (pull cluster) or did you just check through the sensor hole?

Ricofrancois 12-18-2011 10:45 PM

Re: Adding Automatic Headlamps!
 
Thanks again

I will check behind the instrument cluster.

Milous 12-19-2011 02:24 AM

Re: Adding Automatic Headlamps!
 
Quote:

Originally Posted by Ricofrancois (Post 536412)
I will check behind the instrument cluster.

Follow the C3 harness that is plugged into the cluster.

Ricofrancois 12-19-2011 10:46 PM

Re: Adding Automatic Headlamps!
 
Hi

I checked but no luck. I can't find an cable.

This is the 3 connectors I have behind the cluster, and the sensor crying to be connected :(

See photos

https://plus.google.com/photos/10069...44271025094497


All times are GMT -5. The time now is 01:27 PM.

Powered by vBulletin® Version 3.8.8 Beta 4
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
Copyright 2012 - JeepGarage.Org
The Jeep Grand Cherokee Owners Community