Jeep Garage  - Jeep Forum

Jeep Garage - Jeep Forum (http://www.jeepgarage.org/forums.php)
-   Grand Cherokee - WK (http://www.jeepgarage.org/f5/)
-   -   Will these fit?? (http://www.jeepgarage.org/f5/will-these-fit-1638.html)

Matteo 07-22-2009 02:16 PM

Will these fit??
 
http://www.k2motor.com/ltgkee05gledyd.html

will they fit in my 09??

B.P.O.D 07-22-2009 02:18 PM

Re: Will these fit??
 
yes but you have to do some wiring work to get them to work.

Matteo 07-22-2009 02:19 PM

Re: Will these fit??
 
why just because they arent my year?? what abotu these:

http://www.k2motor.com/2lhpgkee05jmbyd.html

B.P.O.D 07-22-2009 02:21 PM

Re: Will these fit??
 
i have an 08 as well but for them to work on our trucks we have to do some wiring work. it was discussed here as well
http://jeepgarage.org/showthread.php?t=1288

those headlights will not work on 08+

---------- Post added at 03:21 PM ---------- Previous post was at 03:20 PM ----------

hehe i had the same questions as you:)

robpp 07-22-2009 02:25 PM

Re: Will these fit??
 
go to the Lipshitz Vendor page and post a question there.

Jason can pre wire them for you to make it easy to add those to your 07+.
I think its about 100 bux to do it.

Issue is the 05/06 lights have a 8 pin plug and the 07 and up have a 3pin and a 2 pin.
also, early has a seperate wire for brake and blink, the later ones use the same wire for both.


there are cheaper solutions that are a bit shaky and still include about25 bux in parts from the dealer.

if its in the budget, get Lipschitz to wore them for you.........

B.P.O.D 07-22-2009 02:34 PM

Re: Will these fit??
 
^^^ thanks rob!

i provided him with the link as well

saleen032 07-22-2009 03:04 PM

Re: Will these fit??
 
Or you could cut and solder the wires for almost nothing....soldering wires is an approved Chrysler/Mopar method

Matteo 07-22-2009 03:12 PM

Re: Will these fit??
 
what if i was to bring them to the dealership, would they do it for me??

B.P.O.D 07-22-2009 03:14 PM

Re: Will these fit??
 
def not!!!

robpp 07-22-2009 03:55 PM

Re: Will these fit??
 
Quote:

Originally Posted by saleen032 (Post 37514)
Or you could cut and solder the wires for almost nothing....soldering wires is an approved Chrysler/Mopar method

what do you about the connectors.....

just not have any and if the light needs removed you cut wires?????

also, not everyone is comfortable messing with wiring. or have soldering capability.

i dont like that idea.

why jason gets what he gets for his:
1. he has sourced the plugs. one for the light, the 8 pin, and also the mate for the factory 3 pin on the later lights. the only on not sourced is the reverse plug. he supplied a squeeze tap for that one.


All times are GMT -5. The time now is 02:50 AM.

Powered by vBulletin® Version 3.8.8 Beta 4
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
Copyright 2012 - JeepGarage.Org
The Jeep Grand Cherokee Owners Community