Jeep Garage  - Jeep Forum

Jeep Garage - Jeep Forum (http://www.jeepgarage.org/forums.php)
-   Interior/Exterior/Visual (http://www.jeepgarage.org/f197/)
-   -   You have LED's for turnsignals!? Want them to blink normal again- I have a RELAY!!! (http://www.jeepgarage.org/f197/you-have-leds-for-turnsignals-want-them-to-blink-normal-again-i-have-a-relay-18842.html)

grantb 02-13-2011 09:33 PM

You have LED's for turnsignals!? Want them to blink normal again- I have a RELAY!!!
 
Hey guys-

I am working with a company who makes custom relays for all purposes.

They already manufacture a WJ relay - and are considering creating a relay for folks who have installed LED turn signals and are facing HYPER FLASHING and or bulb out errors.

Do you have an interest in purchasing one?

robpp 02-13-2011 09:50 PM

Re: You have LED's for turnsignals!? Want them to blink normal again- I have a RELAY!
 
its not that big a deal bro on the wk. and its not a relay but most likely a resistor. ALL the LED places sell them along with ANY electrical parts place.

unless Im missing something??/

grantb 02-13-2011 10:01 PM

Re: You have LED's for turnsignals!? Want them to blink normal again- I have a RELAY!
 
You are correct that you require installing a resistor on every LED bulb (3 per headlight assembly, and 2 per taillight - which is 10 resistors total). If and when I ever sold the jeep and wanted to go back to stock headlights I would have to remove the resistors and possibly would/could have damaged the stock wiring when installing.

in the respect to a resistor for the WJ there is not a replacement relay for the COMBINATION FLASHER. :(

I have looked high and low - which is why I am reaching out to request someone make one for me.

The COMBINATION FLASHER (relay) is responsible for the control of electricity to the turn signals and there proper operation.

This is all my understanding anyway....

robpp 02-13-2011 10:07 PM

Re: You have LED's for turnsignals!? Want them to blink normal again- I have a RELAY!
 
ok, i dont know WJ soecifically. on the wk, you only have to use in the front and one in the back and your done. if you dont want to TAp or CUT the original harness Lips can make a harness that would be PnP and take care of it.


so go find Lipschitz in the vendor area and point him over here. he helps us solve all sorts of electrical issues. he got a 5.9 and maybe he could helop you sort this out!

GL


All times are GMT -5. The time now is 08:17 PM.

Powered by vBulletin® Version 3.8.8 Beta 4
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
Copyright 2012 - JeepGarage.Org
The Jeep Grand Cherokee Owners Community