Jeep Garage  - Jeep Forum

Jeep Garage - Jeep Forum (
-   Troubleshooting/Problems (
-   -   Engine number lookup... Slightly off topic but i need some direction (

JeradyDavis 02-17-2011 01:09 PM

Engine number lookup... Slightly off topic but i need some direction
Aloha all, sorry to post a little off topic, but I'm lost. The local dealers won't help, and I can't find jack online. I have two motors in my yard, supposedly jeep engines although I don't think so seeing as they are 3.5l v6's. I have some cast numbers and what I think may be a serial. They are mopar motors I do know, casts of emblems are present. The numbers I have are 04792660aa and 12581558. Both are 3.5l v6 mopars, I'd really like tofind out what they are for, maybe I can find bodies for them... Help? Thanks you guys...

Frango100 02-17-2011 06:36 PM

Re: Engine number lookup... Slightly off topic but i need some direction
Chrysler P/N 4792660AA is used in Chrysler LHS and 300M, but depending on the buildyear it can also be for other Chrysler vehicles.
I don't know anything about these engines, but just found it on the net.

And here some more from the wikipedia

This 3,518 cc (3.518 L; 214.7 cu in) engine is a version of the 3.3 but with a larger bore of 96 mm and the important addition of overhead cams. The 3.5 L version has an intake arrangement with two separate manifolds and throttle bodies connected with a crossover valve. This provides better low and midrange torque. The four valves per cylinder are driven by a single overhead camshaft as opposed to the conventional DOHC arrangement for multivalve engines. Another difference with the 3.5 as opposed to the 3.3 is the fact that the camshaft is timed to the crankshaft with a belt rather than a chain. The water pump is also driven by the timing belt on the 3.5, whereas on the 3.3, the accessory belt drives it.
At its debut in 1993, this engine produced 214 hp (160 kW) and 221 ft·lbf (300 Nm) from an iron block and aluminium cylinder heads. The 3.5 L engine was redone entirely of aluminum in 1999 as the EGG high output, producing 247–253 hp (190 kW) at 6500 rpm with 250 ft·lbf (339 Nm) of torque at 4000 rpm. Output from 2002–2004 for the standard output EGJ is 234 hp (174 kW) at 6000 rpm with 241 ft·lbf (327 Nm) of torque at 4400 rpm. Also for 2002–2004, the EGK 3.5 L Special was built exclusively for the 300M Special, producing 255 hp and 258 ft·lbf.
The EGJ is built in Trenton, MI. The EGG is built in Kenosha, WI. Both are still in production. The EGK version is no longer in production as of 2004.
Vehicles using the 3.5 include:

JeradyDavis 02-18-2011 06:24 PM

Dude thanks so much can I ask where u found it

JeradyDavis 02-18-2011 07:44 PM

I saw the wikipedia reference sorry lol

All times are GMT -5. The time now is 07:08 PM.

Powered by vBulletin® Version 3.8.8
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
Copyright 2012 - JeepGarage.Org
The Jeep Grand Cherokee Owners Community